Battery Chargers
Modern intelligent switch-mode chargers are all of the following descriptions. Maintenance chargers, bulk chargers, boost chargers, equalising charger, float chargers. Multi-mode chargers. Don't be confused we can help. Start by finding out your batteries' Ah (Amp hour) capacity, divide that number by 10 and it will give you an idea of the Amps size/capacity charger you need to charge your batteries. We are factory-approved importers of CTEK, Victron, Traction, Sterling Power & Delta Q.
- Description
- Specifications
- Post a comment
OVERVIEW
BSU2-50B provides a stable voltage and up to 50 amps of fully regulated power to prevent loss of charge and damage to the battery.
This low profile (3.5”) BSU2-50B battery support unit provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a Key On, Engine Off state.
During diagnostic or programming operations, the vehicle’s systems are operating solely from the battery. Maintaining battery charge during this process is critical.
Designed to be wall, ramp or trolley mounted the BSU2-50B has been designed to meet the needs of the high power consuming vehicle.
LiFePO4 Compatible
FEATURES
BSU2-50B can be used with any 12V automotive battery including AGM and GEL
When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain
Designed for use in the workshop and compatible with most diagnostic trolleys
- Reverse polarity protection
- Output current display
- Supplied with 5m IEC power lead (BSU2-50-LS)
- Also supplied with 5m output leads
- Volvo OEM part number is 9513211
SPECIFICATION
- INPUT: 110-240v AC 50/60Hz
- WEIGHT: 13.2lb
- SIZE: 11”x7.5”x3.6”
- CARTON: 12.6”x9.9”x9”
- OUTPUT: 13.4v up to 50A continuous
A chargers purpose
When you are choosing your next car, you carefully consider what you will use it for most. Be that a Micro car or an SUV the engines might be of similar power but the purpose, its intended use is of great importance.
With your charger the usage/environment, for example, in a marine environment, you use a sealed IP44 or better (higher numbers are better) rating. Maybe its internally mounted but still in a sea spray zone so conformity coated board or potted components for a fully sealed solution are ideal. Consideration for what if the power supply doesn't de-rate in hot conditions (internally via thermal control or an external sensor to monitor the battery temperature). That the energy efficiency is a high percentage to reduce heat and chance of failure and if you travel internationally with your charger that it's rated for 110VAC input and 230VAC input (universal power supply). Accessory items are available if required and technical support is available from the place of purchase.